Fault indicators
... detected by the fault indicator which will go in alarm mode. Streamer Inc. © 2010–2023 ... Communication – – GSM/GPRS Fault indication Red flag Red flag Red flag+ COM Fault phase indication – – – Fault ... or COM Live line installation Yes Yes Yes Connect to SCADA – – – Option 3 pcs carry-on case 3 pcs ...
FPC OM (November 20)
... about event (ALARM or ALARM resetting) and an address of FPA, which was triggered: The normal mode of ... the system operation is the READY mode. In READY mode, FPC monitors the status of all conected FPA ... about event (ALARM or ALARM resetting) and an address of FPA, which was triggered: The normal mode of ... the system operation is the READY mode. In READY mode, FPC monitors the status of all conected FPA ...
FPA24:X OM May'21
... mode. It needs to adapt FPA to environment and to initially setup the sensor. In this mode the LED ... setup, the FPA goes into READY mode, the LED indicator is solid green. The buttons are inactive until ... mode. It needs to adapt FPA to environment and to initially setup the sensor. In this mode the LED ... setup, the FPA goes into READY mode, the LED indicator is solid green. The buttons are inactive until ...
FPA24:X OM May'21
... supplying, FPA goes to initial setup mode. It needs to adapt FPA to environment and to initially setup the ... sensor. In this mode the LED indicator of FPA flashes with green each 0.5 s. Procedure shall take up to 5 ... supplying, FPA goes to initial setup mode. It needs to adapt FPA to environment and to initially setup the ... sensor. In this mode the LED indicator of FPA flashes with green each 0.5 s. Procedure shall take up to 5 ...
FPA24(4S) OM
... mode of the system operation is the standby mode (READY). Any other modes (ERROR or ALARM) require ... intervention by the duty or maintenance personnel. In READY mode, FPA checks the ambient air for the presence ... mode of the system operation is the standby mode (READY). Any other modes (ERROR or ALARM) require ... intervention by the duty or maintenance personnel. In READY mode, FPA checks the ambient air for the presence ...
FPA24(4S) OM firmware 1.2 Apr'22 edited
... construc�on and pain�ng works. 8 Possible faults and troubleshoo�ng The normal mode of the system opera�on ... is the standby mode (READY). Any other modes (ERROR or ALARM) require interven�on by the duty or ... troubleshoong The normal mode of the system operaon is the standby mode (READY). Any other modes (ERROR or ALARM ... ) require intervenon by the duty or maintenance personnel. In READY mode, FPA checks the ambient air for the ...
Testing liquid FIPRES OM.pdf
... supplying equipment, except FPA is off 2. FPA should be in «READY» mode (LED is glowing with green with rare ... check results: a. If the FPA goes into «ALARM» mode (LED is glowing by red) within 10-15 seconds after ... supplying equipment, except FPA is off 2. FPA should be in «READY» mode (LED is glowing with green with rare ... check results: a. If the FPA goes into «ALARM» mode (LED is glowing by red) within 10-15 seconds after ...
FPА – Fire Prevention Alarm - order on Streamer
... for the presence of rFPT signal gas. In case of signal gas detection FPA goes into ALARM mode and ... . In case of signal gas detection FPA goes into ALARM mode and transmits ALARM signal via Modbus RS-485 ...
FPC – Fire Prevention Concentrator - order on Streamer
... all connected FPAs and displays current operation mode. FPC has a log, stored in non-volatile memory ... connected FPAs and displays current operation mode. FPC has a log, stored in non-volatile memory with all ...
Pathfinder 360 Alpha Range - order on Streamer
... Fault Indication P360A (D, S, or F &FD) via LED P360A COM GSM via LED, SMS service P360A COM GPRS via ... indicator P360A COM GSM FO.P3.PL3G.00.WW Fault indicator P360A COM GPRS FO.P3.PL3P.00.WW ✕ Streamer Inc ...
